In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: propagate shared-frag marker in skb_zerocopy()
skb_zerocopy() moves frag descriptors from @from into @to and takes a
reference on each frag, but it does not copy skb_shinfo(from)->flags into
skb_shinfo(to)->flags. A destination skb holding the same page-cache
backed frags as the source therefore reports skb_has_shared_frag() as
false.
That breaks the invariant relied on by later in-place writers. ESP input
checks skb_has_shared_frag() before deciding whether an uncloned
nonlinear skb can skip skb_cow_data(); with the marker lost, an skb that
skb_zerocopy() built for nfnetlink_queue or for an openvswitch upcall is
decrypted in place, letting an unprivileged user write into the page
cache of a root-owned read-only file.
Propagate SKBFL_SHARED_FRAG when frag descriptors are copied, as done for
the other frag-transfer helpers.
In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack: tcp: use UNACK timeout for non-closing RST packets
Commit be0502a3f2e9 ("netfilter: conntrack: tcp: only close if RST
matches exact sequence") keeps an established conntrack entry in
ESTABLISHED when an in-window RST does not match the expected sequence
number exactly, so the endpoint can validate the RST with a challenge
ACK.
The timeout selection nevertheless uses the CLOSE timeout for every RST
packet. The bug is that timeout selection is based on the packet type,
not on the state transition result: even when RST validation keeps
new_state in ESTABLISHED, the timeout is still forced to
TCP_CONNTRACK_CLOSE.
Linux TCP independently rate limits challenge ACKs per socket. A second
non-exact RST can therefore arrive after the first challenge ACK has
restored the timeout but before the rate limit expires. The second RST
lowers the timeout to 10 seconds again while the endpoint suppresses the
second challenge ACK, allowing the conntrack entry to expire while both
TCP endpoints remain established.
Using the ESTABLISHED timeout for such RSTs would avoid this short
expiration window, but it could also retain stale entries for the
five-day default because conntrack cannot reliably match the endpoint's
exact TCP state.
Use the UNACK timeout for RST packets that leave the conntrack entry in
TCP_CONNTRACK_ESTABLISHED. Exact-match RSTs and accepted RST packet
trains still fall through to timeouts[new_state], which preserves the
CLOSE timeout when conntrack accepts the RST as closing the flow.
This avoids the aggressive 10-second expiration window for non-exact
RSTs while preserving the short timeout for RSTs that conntrack accepts
as closing the flow.
A vulnerability was detected in TOTOLINK CA300-PoE 6.2c.884. Affected by this issue is the function UploadCustomModule of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument File results in buffer overflow. The attack may be launched remotely. The exploit is now public and may be used.
A security vulnerability has been detected in TOTOLINK CA300-PoE 6.2c.884. Affected by this vulnerability is the function setWiFiWdsAddConfig of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument ApCliKeyStr leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used.
A weakness has been identified in TOTOLINK CA300-PoE 6.2c.884. Affected is the function setWiFiRepeaterConfig of the file /cgi-bin/cstecgi.cgi. Executing a manipulation of the argument ApCliKeyStr can lead to buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks.
Missing Authorization vulnerability in ThemeGrill User Registration user-registration allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects User Registration: from n/a through 5.3.1.
A security flaw has been discovered in TOTOLINK CA300-PoE 6.2c.884. This impacts the function setWiFiMultipleConfig of the file /cgi-bin/cstecgi.cgi. Performing a manipulation of the argument Key1Str1 results in buffer overflow. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.
A flaw has been found in DataEase up to 2.10.27. Affected by this issue is the function StaticResourceServer.validateSvgContent of the file core/core-backend/src/main/java/io/dataease/visualization/server/StaticResourceServer.java of the component SVG Handler. Executing a manipulation can lead to cross site scripting. It is possible to launch the attack remotely. The exploit has been published and may be used. Upgrading to version 2.10.28 can resolve this issue. This patch is called 0709fe98d6608c3507daee3e92cf433e7ff61370. You should upgrade the affected component. The vendor confirms: "The reported tab/entity-based URL bypass is covered by our previously implemented SVG security hardening. The fix replaces the blacklist-based checks with namespace-aware element and attribute allowlists, restricts permitted references to document-local fragments, and applies a restrictive Content Security Policy to uploaded SVG responses."
eLightUp / Meta Box – WordPress Custom Fields Framework
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in eLightUp Meta Box – WordPress Custom Fields Framework meta-box allows Stored XSS.This issue affects Meta Box – WordPress Custom Fields Framework: from n/a through 5.15.3.
Missing Authorization vulnerability in PluginUs.Net FOX woocommerce-currency-switcher allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects FOX: from n/a through 1.5.6.
Missing Authorization vulnerability in ThemeGrill User Registration user-registration allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects User Registration: from n/a through 5.3.1.
A vulnerability was detected in DataEase up to 2.10.27. Affected by this vulnerability is the function WhitelistUtils.endsWithAny of the file WhitelistUtils.java of the component Authentication Filter. Performing a manipulation of the argument File results in unrestricted upload. It is possible to initiate the attack remotely. The exploit is now public and may be used. Upgrading to version 2.10.28 addresses this issue. It is advisable to upgrade the affected component. The vendor confirms: "This issue has been addressed by enforcing authentication on the standalone static-resource upload endpoint independently of the URI suffix whitelist."
A security vulnerability has been detected in DataEase up to 2.10.27/3.1.0. Affected is the function ExtWhere2Str.extWhere2sqlOjb of the file engine/trans/ExtWhere2Str.java of the component Chart Data Handler. Such manipulation of the argument operator leads to sql injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. Upgrading to version 3.2.0 is able to address this issue. Upgrading the affected component is advised. The vendor confirms: "The fix validates the complete compound operator and uses fixed AND / OR keywords instead of concatenating user-controlled logic into SQL."
Treeio through 2.0 contains an insecure deserialization vulnerability in UpdateRecord.get_format_strings and ModuleSetting.loads that allows staff users to execute code via unverified pickle data. Attackers can store a crafted base64 pickle payload in an UpdateRecord format_strings field through the Django admin, executing Python code as the web server user when news feeds render.
libexpat through 2.10.0 contains an out-of-bounds read vulnerability in unknown_toUtf8() and unknown_toUtf16() in xmltok.c when handling application-registered unknown encodings. Attackers can supply a document ending in a truncated multibyte sequence so the convert callback reads past the parse buffer, leaking adjacent memory or crashing applications.
Frappe ERPNext before 15.121.4 and 16.x before 16.36.0 contains a missing authorization vulnerability in the whitelisted erpnext.buying.utils.get_linked_material_requests method lacking document or company permission checks. Authenticated users, including portal users or users without roles, can supply item codes to retrieve open Purchase-type Material Requests belonging to other companies.
Frappe ERPNext before 15.121.4 and 16.x before 16.36.0 contains a missing authorization vulnerability in the whitelisted get_bom_items and get_bom_diff methods that skip BOM read permission checks. Any authenticated user, including portal or no-role users, can call get_bom_items with a BOM name to retrieve every raw material, quantity, rate and cost.
Frappe ERPNext before 15.121.4 and 16.x before 16.36.0 contains a missing authorization vulnerability in erpnext.crm.utils.get_open_activities that exposes ToDo and Event records. Any authenticated user, including portal or no-role users, can supply arbitrary ref_doctype and ref_docname values to enumerate activities and private calendar event details.
Frappe ERPNext before 15.121.4 and 16.x before 16.36.0 contains a missing authorization vulnerability in the whitelisted get_linked_payments_for_doc method. Any authenticated user, including portal users, can supply arbitrary company, doctype, and docname values to read Payment Ledger Entry allocation data for other companies' invoices and vouchers.
Fraunhofer HHI VVdeC through 3.2.1 contains a heap out-of-bounds read vulnerability that allows attackers to crash the decoder by supplying a collocated picture of different resolution. Attackers can craft a VVC bitstream enabling TMVP with a smaller collocated reference picture, causing getColInfo to read past the colMotion allocation when error concealment is enabled.
Fraunhofer HHI VVdeC through 3.2.1 contains a NULL pointer dereference vulnerability in InterPrediction::xPredInterBlk that allows attackers to crash the decoder by switching SPS to enable reference wrap-around. Attackers can supply a crafted VVC bitstream activating a new SPS with sps_ref_wraparound_enabled_flag set, causing reads from missing PIC_RECON_WRAP buffers and denial of service.
Fraunhofer HHI VVdeC before 3.2.1 contains an out-of-bounds read vulnerability that allows attackers to crash the decoder by supplying bitstreams with overlapping slice CTU coverage. Attackers can code a CTU in a second slice so a bi-predicted BDOF coding unit carries a negative reference index, causing Slice::getRefPic to read outside m_apcRefPicList and crash decoding.
Fraunhofer HHI VVdeC before 3.2.1 contains a heap out-of-bounds read vulnerability in SEIReader::xParseSEIScalableNesting that allows attackers to read past heap allocations by casting the SEI wrapper object instead of its payload. Attackers can supply a crafted VVC bitstream with a scalable nesting SEI containing a nested buffering period SEI to crash the decoder or copy adjacent heap memory.
Fraunhofer HHI VVdeC before 3.2.1 contains a heap use-after-free vulnerability in DecLibRecon::createSubPicRefBufs because decompressPicture clears m_subPicExtTasks without waiting for pending tasks. Attackers can supply a crafted multi-subpicture VVC bitstream to decoders using two or more threads, causing heap memory corruption or a decoder crash.
Fraunhofer HHI VVdeC before 3.2.1 contains a heap use-after-free vulnerability that allows attackers to corrupt memory by redefining an ALF adaptation parameter set id still referenced by slices. Attackers can supply a crafted VVC bitstream that, with multithreaded decoding, makes worker threads dereference freed APS objects in CABACReader::readAlf() and AdaptiveLoopFilter::reconstructCoeff(), causing crashes or heap corruption.
A vulnerability was found in ESEngine DeepSeek-Reasonix up to 1.33.0. Impacted is the function loadGitStatus of the file build.rs of the component Build Script Execution. Performing a manipulation results in permission issues. The attack may be initiated remotely. Upgrading to version 1.34.0 is recommended to address this issue. The patch is named a54659c2c5b0f4e57aae2b44d41f421c6a71e8cf. You should upgrade the affected component.
In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_teql: fix use-after-free on lower qdisc drop
The issue: teql_master_xmit() tests the slave's ndo_start_xmit() return
value against NETDEV_TX_OK alone. A slave that consumes the skb but
returns an error code (rc < NET_XMIT_MASK, e.g. NET_XMIT_DROP) is treated
as if the skb were still owned, so the loop restores skb->dev and calls
__skb_pull() on it. A VLAN slave returns the result of dev_queue_xmit()
from its ndo_start_xmit() (propagated since cbbef5e18307), and when the
lower qdisc drops the packet that value is NET_XMIT_DROP after the skb
has been freed, giving a use-after-free in teql_master_xmit().
The Fix: test for consumption with dev_xmit_complete(), which accepts
NETDEV_TX_OK and every rc < NET_XMIT_MASK, matching other callers that
need to distinguish consumed results from busy. Only NETDEV_TX_OK keeps
the packet counted in tx_packets/tx_bytes and advances the slave; a
consumed result that is neither a success nor NET_XMIT_CN ends the
attempt and is charged to tx_dropped, so lower-qdisc drops are no longer
reported as good transmits. NET_XMIT_CN is counted like success because
it can accompany acceptance of the current packet: pfifo_head_drop drops
the old head, enqueues the current skb and returns NET_XMIT_CN.
Conditions to recreate the bug:
With CONFIG_NET_SCH_TEQL,
CONFIG_VLAN_8021Q and CONFIG_DUMMY enabled, add lkrdummy0 (dummy) and
lkrvlan0 (VLAN id 37 on lkrdummy0); set a pfifo limit 0 root on lkrdummy0
and a teql0 root on lkrvlan0; bring teql0 up with an address and send one
UDP packet to it. The VLAN xmit returns NET_XMIT_DROP from the lower
qdisc while holding a freed skb.
In the Linux kernel, the following vulnerability has been resolved:
tun: Require CAP_NET_ADMIN to attach to an ownerless device
Twenty years ago I made creating a tuntap device require CAP_NET_ADMIN
in commit ca6bb5d7ab22 ("[NET]: Require CAP_NET_ADMIN to create tuntap
devices.")
The idea was to allow the permissions on /dev/net/tun to be relaxed to
0666 and thus allow owners of tun devices assigned with TUNSETOWNER to
actually open it and get at their devices.
What we missed at the time was that persistent devices with *no* owner
were already essentially world-consumable, and anyone who could open
the device node could also attach to those.
Even then, using persistent devices with no explicitly set owner — on
the (false) presumption that CAP_NET_ADMIN would be required to open
them — wasn't an egregious userspace bug. There are cases where it does
make sense to separate the creation/configuration of the netdevice, from
the process which shovels packets into it.
Since then, TUNSETGROUP was added a year later in commit 8c644623fe7e
("[NET]: Allow group ownership of TUN/TAP devices."). Its commit message
noted that if both uid and gid are set, both have to match (in itself a
bizarre choice) — but still not that with *neither* set, no permission
at all was required.
Then in 2012 commit c8d68e6be1c3 ("tuntap: multiqueue support") allowed
new queues to be attached to a device from the moment of its creation,
with no way for userspace to close the race between creation and a
subsequent TUNSET{OWNER,GROUP}.
In 2024, commit 3ca459eaba1bf ("tun: fix group permission check") tried
to fix things to be saner: only require the user *or* the group to
match, in line with standard POSIX permissions, and require
CAP_NET_ADMIN if neither the user nor group authorised the access
(although it put the CAP_NET_ADMIN check first, and would wrongly have
reported the capability as having been used even when it was not).
That fix was reverted in commit a70c7b3cbc06 ("tun: revert fix group
permission check") due to allegedly causing a regression in an selinux
test suite which *expected* the attachment to succeed when authorised
by none of user, group, nor CAP_NET_ADMIN:
https://lore.kernel.org/netdev/CAFqZXNtkCBT4f+PwyVRmQGoT3p1eVa01fCG_aNtpt6dakXncUg@mail.gmail.com/
We should not break UAPI. But we don't have to consider an selinux test
case which deliberately exercises a security flaw to be UAPI worth
preserving either. To which end, I have fixed it in selinux-testsuite
commit b2f894f0016b ("tests/tun_tap: set an owner on the device for the
relabel tests").
So: fix the lack of CAP_NET_ADMIN check on devices which *haven't* been
assigned an owner or group, while leaving the weird tun ownership model
as it was (user *and* group have to match, if both are set). If someone
still wants to fix the latter (which wasn't actually the reason the
previous attempt was reverted), they can do it under separate cover.
Permit attaching to an existing device only if an owner and/or group was
set and the caller matches all that were set, or if the caller has
CAP_NET_ADMIN. The only behavioural change is that a device with no
owner or group now requires CAP_NET_ADMIN to attach — precisely the
loophole we want to close.
And put the CAP_NET_ADMIN check in the right place this time.
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: drain session procfs readers before dropping table references
Session registration failure and connection cleanup can drop the table
reference while the per-session procfs entry is still accessible. If a
reader holds the last remaining reference, its final put calls
proc_remove() from its own callback and waits for that callback to
finish.
Remove the procfs entry before dropping the table reference in the
registration failure path. Queue sessions removed during connection
cleanup and drain their procfs readers after releasing both session
locks, then return their table references. Keep the global hash node
unhashed while a session is queued so a concurrent unregister cannot
drop the reference again.
Previous-session replacement also destroys the file table before the
session is finally freed. Detach the idr under the lock used by procfs
file counters, and report zero files after it has been detached. This
prevents a reader from accessing the idr during or after its
destruction.
CVSS Unscored→
No matching CVEs
Sources:NVD ↗CISA KEV ↗CVSS scores do not establish exploitation.
This product uses the NVD API but is not endorsed or certified by the NVD.